I have an '07 600 CFI Switchback. Any ideas on how to make it corner flatter? Yeah the skis come up when you're on the gas out of a corner, thats ok, I was prepared for that. What I wasn't ready for was how easily (and quickly) the inside ski comes up in a corner. Seriously worse than it should be, I think. Thanks in advance for any help!!

put your rear scissor stop blocks in a higher setting or move the scissor pivot back a hole in the rail.

You likely have too much preload on your ski shocks. Try backing off to no preload there, or start pulling up on your limiter straps.

Thanks. I'll try the front springs first. They do seem to be cranked up quite a bit.