heres some better pics finally a got a good digi camera

How do you like those skiis?? I've been thinking about picking a set of those up for a while now. But I just can't decide. They are just a cover right?? I just take the stock plastic covers off and install the new ones. Do you have any other pics of the skiis?? Thanks a lot.

another

02 mxz600 those are precision skiis they are not skins.
Here is one of the front one vent plugged one to go

the skiis

for rocket

That is some high quality pictures. Do you want to next time you are at your sled measure the width of the saddle of you precision skis. I am thinking if adding a set to my polaris if I only need to add a washer or two. Also what size is the mounting hole I can always drill the ski saddle but don't what to have to drill the bushing on the new sled. Thanks Buddy.

XC600 you are in luck bombardier makes a mounting kit for your polaris . The entire set of skiis with carbides and mounting brackets is $369 CAD. You wont have to drill or modify anything just bolt on and go. :) They are great skiis and will improve the ride on any sled.

Ohhhh, so they just bolt right up then?? Heck, if they install like that it can't get much easier. Did you buy them direct from Ski-Doo? I might just have to buy those now. I really like them. Thanks for the extra pics.

02mxz600 my dealer switched them with the yellow prcesions that came stock with the gade. They also come in a red and yellow swirl pattern might look better with a red sled.

The skiis are concave on the bottom helps in the powder and on water.

I have the two tone Yellow and Black like yours. I have a 02 MXZ X 600, just forgot about the X when I made my screen name. :) I was just at Ski Doo's webpage and they list them at $61. But I'm pretty sure that's $61 a piece. Do they come with the carbides installed? Or can I use the carbides I have on my skis now? Sorry about all the questions. And thanks for your help.

nice quality pics....man your sled looks really sharp permafrost :thumbsup:

Thanxs Panteraone cant wait to take it for a real ride
02mxz600 NP you can use you exsisting carbides from your stock skiis . For just the ski soles they list for 61 USD each

Those are some different looking skies. Don't think I have ever seen those before!!!!!!! Nice sled though :)

Thanks Permafrost I forgot to mention that I heard they are making mount fits for other brands too. But I was not sure if there was truth to this. Do the percison skis run carbide on the inner and outer rod of each ski, or only one rod per ski has carbide and the other is just a hard bar. And what size of carbides does the kit come with if you remember. Well I think I have changed my mind from C&A pro race skis to skidoo precison I did not realize they were that cheap. The C&A's were going to cost me $540 Canadian for everything. :D
How are the skis on powder I have heard they are the excellent on trails but haven't heard what they are like in the fluffy stuff. Also do you know what the precision skis weighs with mount and carbides.

what that vent on the front of your sled is that new for the 03,.??? ???

what that vent on the front of your sled is that new for the 03,.

If it is, it must only be on the renegade, my '03 Trail doesn't have it.

It is new for the 03 renegade. but frost didnt like it (i dont see how anyone would) so hes coverin them up.

It is carbide on both runners. The skiis are concave like the simmons and work good on the trail in powder and on water. The kit comes with the smallest ones available, 4 runners with 5-6.5" of carbide. Even with the long track gade and a 1.25" i feel there is no reason to get the bigger more expensive carbides.

The new vents on the front are a sneak trick bombi pulled at the last minute. I will be covering those water intake holes up, just need to make one more custom piece, (using a wrecked 02 two tone hood).. The vents were put there to stop the other vents from melting :doh: They will also let powder in and smother my motor :cussing: I thought all 03 had it but i guess not i will check other sleds to see.

Dude, that is one sweet lookin Doo!! :thumbsup:

How do you mount the skid plate with those vents? They are right where the two front rivet holes are.

great pics, sharp sled

Originally posted by permafrost@Nov 10 2002, 05:03 PM
Thanxs Panteraone cant wait to take it for a real ride
02mxz600 NP you can use you exsisting carbides from your stock skiis . For just the ski soles they list for 61 USD each
Cool. I'll be adding those to my wish list.

Andw1 i was perplexed by that also. We mounted one on another 03 gade and just made two holes below on either side. When mounted It leaves two triangle size hole portions of the vents exposed though. The top piece of the skid[plate can be cut off also/ I will be mounting my skidplate this week and post some pics. :)

Man that sled puts mine to shame,awsome permafrost. :thumbsup:

When I ordered my 02,I really liked the two-tone,but only in X model. I did not want an X,so no two-tone. ???

Ya, i will say perm, thats one KICK ### sled you got. mind trading!??

:withstupid:


Thats one BEAUTIFULL gade :inlove: :inlove: :inlove:


:thumbsup: :thumbsup: :thumbsup:

Nice looking sled Perm!!! What kind of camera did you buy? I'm on the verge of buying one too.

Mxz7 the only reason i have the two tone is that it is half the price it used to be. :)
Jim i purchased a Canon powershot A40. Takes flash cards and shoots movies with sound too.

Fugi 2600Z

hmmm, that pic looks better on my computer then it did on this post!! lol
Ok, one more