Have a 95 Chassis with a 96 XCR 600 motor that i'm parting out. Sled is set up for 1,000ft ice. Motor work is all done by Aaen. Has Aaen Loud pipes, crank stroked 3mm, cylinders bored out, race ported for 1,000ft engine spins at 10,000 RPM. Heads machined out for domes, have 2 sets available for 114 octane. Mikuni bored flatslide carbs, wet nitrous with bottle warmer and fuel pump. Running the mechanical pump and the electric pump for the NOS. Usi ice skis, stock track with picks, fox shocks shimmed to slam the machine down but it still has some give. Race Pack Avenger III gauges. Wiseco pistons, and additional cylinder bored and ported by Indy Specialties. Several ice picks, Many NOS jets, slide lube system, new polaris seat, belly pan and custom old school "Mopar plum crazy purple" paint on the chassis. Hood is Pearl white with a tint of pink to match the chassis. Less then 10 hours run time on the engine. Clutching is Aaen components on new Polaris clutches, no rebuilt junk here. It's geared for 140MPH. The chassis was completely torn down, stripped and repainted. New Polaris hood, belly pan, seat and all plastic. It's being parted out, i won't sell it complete, this is all custom work by Aaen. E-mail for prices and pics: jkroska@gmail.com i can ship worldwide and creditcards are accepted. I have receipts for the porting $800, custom Aaen pipes $700, crank work and cylinder boring all receipts.