I have desided that i am going to adjust my oil pump. *My mach z doesnt smoke that much at idle but when you hit the gas there is a noticeable amount of smoke that comes out of it. *I think that its getting way to much oil. *

My dealer sets the machines up rich but I think he went overboard here. *

Also i mixed regular doo oil with amsoil and wondered if that caused the smoking. *

I know that the triples need more oil and its good to spoil them but im sure that this is just to much. *

Can someone with a mach z give the info im going to ask.

For 1 full tank of gas 43L how much oil should be used in the tank? *

And does the oil pump setting work on just moving the cable to the next notch? *

And what meters the flow of oil at idle?

Thanks.

Machzzzz1 *If you burn 43Lt of fuel and use 1 Lt of oil you would be averging *43to1. How much oil are you using?

40Lt fuel, 800mm oil is a 50to1

check this info out because I am not positive it is corect.

I was told that when running amsoil *
the oil pump can be turned down because the (viscosity )
is diferent *than regular 2 stroke oil.

basicaly *ams oil *will flow thrue youre oil pump faster than stock oil.

I recomend running the oil you have out and refilling it whith the oil
you will be useing then *checking the consumption of oil.