i'm considering buying the above mentioned sled and was wondering if anyone could share info regarding any items to look for on this machine when i go to inspect it. i am definitely doing a compression test - anyone have psi numbers as well as how much deviation is acceptable between the cyls. any help appreciated.

thanks, frank

115psi min,,,,, 125- 130 normal 5 psi difference max,,,

1500miles or under it should be ok , check belt,clean carbs and chain adj.
2500 miles check belts,,clutches for cracks ; chain for wear;drive bearing l/h,rebuild shocks,change filters
4500 miles,,clutches should be rebuilt,drive bearing replaced,shocks rebuilt,replace chain
6000 miles new rings,new gears,new shocks,disassenble and check everyting

went to see that sled today and i measured 107 and 118 psi, it seemed to smoke excessively and did a wicked backfire on start up after the compression test. based on your advice i decided to pass, thanks for your help.