I am installing the passenger seat on a friends Rev tonight. I was wondering if any of you have done this and if so are there any 'tricks' I should know about.

I played with one on the show room floor, be prepared to spend about 30 seconds... maybe a minute if the seat is still in the box... your friend shouldnt need your help.

Sounds like the one you played with on the showroom floor, already had the support brackets mounted. Once that is done, taking the seat on and off is a snap. To mount the brackets, you have to take the rear section off, slit the section from the underside and drill four holes thru the plastic for the bars to come up thru. At least that is what I understand. I will find out tonight.