Snowmobile World banner

phazer and oil injection pump

3K views 1 reply 2 participants last post by  linny 
#1 ·
hi folks , jus a few questions 4 ya'll, i wanna disconect the oil injection pump and premix ,(had a few problems in past with oil injected machines), do i jus plug off the lines, or loop them to each other ie oil injection in line to the out line, same on carbs, or jus cut and block the lines, this is my first yamaha sled(89 phazer)and have had numerous problems with skidoo oil injection and dont wanna be stranded again with a broke down sled, so any input here would help a ton.
 
#2 ·
I have run yamahas for many years and never have i had a problem with my oil injection if you are worried about it i would just replace the pump for the ease of mind and continue to use the oil injection system. It will save the headache when you stop at the gas pump also make sure the cable that regulates the pump is in good shape and not fraing or broke
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top