I'VE GOT SOME SMALL TEARS IN MY H.O. HOOD. IS THERE A GOOD ADHESIVE THAT WILL FIX IT?

I've had good luck with Duramix 4040 on the skidoo hoods. It is an epoxy type product available from auto supply stores.It requires a special applicator similar to a caulk gun to apply.

You could get it plastic welded.There are many companies that specialize in this and it is relatively cheap,and after it is done and painted it's hard to tell it was ever done from the outside.Just a thought. http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/biggrin.gif

sand down the inside and use fiberglass at any auto store!

there's a product made by Crest (not the toothpaste) http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/smile.gif *called TP-E (two part epoxy), works great