OK, 99 Grand Touring 500 LC * 1800 miles
*Where should my clickers be set at?
*And what setting should my secondary be at,B6 ???Beigh spring.
*Sled tachs out at 8100.
*Having a problem with helix hanging up at 50mph when throttling hard from a stop laboring the motor down to 7000 rpm, if backing off till 40mph and easing on the throttle it will climb to 80mph. *
* http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/confused.gif
What is the different settings on the secondary for?
Thanks

clikers are usually set around three, check the preload on the secondary don't know what it should be for that sled around 15 lbs sounds like your secondary isn't back shifting with that many miles it shouldn't be worn *maybe just dirty hope this helps

Also, the different settings on the sec are for setting the preload. Using a fish scale with the belt off hook the movable sheave see how many lbs it takes to turn it open. If you need a more detailed procedure I or one of the other wrenches on this site will gladly explain