|
|
||
|
mxzx121 02-11-2002, 07:20 PM I have an 02 800 with Heel Clickers. *With stock gearing the sled would pull 7900-8000 rpm. *After the 27 gear was put in the sled would only pull 7700. I took 1 gram out of the tip and that got me to 7800. The sled is running good it ran 117 (GPS) on Ice. I would like to hit 8100 on the tack (not checked) if anyone has and suggestions it would be a great help, thanks. MidMich800twin 02-11-2002, 08:02 PM Did you check your speedo @ 117 on GPS to see how close it *is? Mine ran within the thickness of the needle of 120. ON SPEEDO that is. I was I had a gps or radar to see how close it is. just curious mxzx121 josh speed is everything 02-13-2002, 02:08 PM what are you running for a primary spring. Gunner 02-13-2002, 09:37 PM If you are getting 117 on ice, I wouldn't mess with it. mxzx121 02-14-2002, 10:45 PM The needle was right at 120 when I did that run. Can't remember off hand what spring i have. *It's the one that they tell you to use for a baseline. *I would just like to rev up a little more. *I might have to put the 26 back in, worked fine with the baseline settings. I try take a little more out of the tip. *I just don't want to loose any upshift. 800MXZ 02-15-2002, 08:23 AM MXZX121 - If you are using the Heel Clicker spring, I would recomend that you carry a spare. They are prone to quickly sagging or breaking. | ||