I'll second that. The airbox comes right out without removing the secondary. I know because I just took it out (on a '03 600) to do a good job reinstalling it after it was popping off while riding. I pulled the air box out (without removing the secondary), cleaned off the carbs with brake cleaner, cleaned off the air box seals with brake cleaner, then rubbed them down with belt dressing spray. Reinstalled the airbox and tightened the screws with a long phillips screwdriver. No problems all weekend. The airbox is on solid.
Primary Sled: 2003 Doo Summitt HighMark 800 HO 151 track
Where I sled: Umatilla National Forest, (Blue Mountains) Washington
Originally posted by Andy Dragon@Mar 17 2003, 01:44 PM Not needed, I pulled mine with the secondary on. You will need a LONG bladed phillips screwdriver (12" long blade or so). The boot on the inner carb is in a tight spot and I was able to get it off with a short one, but could not get it back on straight without a long blade. Other than that, it slides out fine with the secondary on.
I agree with Andy. no need to pull the Secondary. I havve been doing this on my 1999 every year without removing the secondary and on the 2000 Summit. Can doo on the 2003 also...
SW users, Please consider a donation or / and becoming a supporting member!