Went to move my steering to the forward postion and low and behold no holes.
I looked in manual and eveything and shows them there .
But sled dont got them.
So I did some measuring and drilled thm myself.
I like it alot, much better than the rearward stock postion.
Me being 6ft 3 tall is a apin in the back where my 03 was allways hunched over to stand up.
I will post pics tomorrow.
Scott
__________________
2006 Yamaha Apex RTX 1000 cc 4 stroke with reverse.
03 600 HO Rev Sport Hers
Black 04 Tritan Enclosed
1995 F250 Power stroker.Diablo chiped 300 + hp.
1993 Ford Bronco 4x4 - ex CN Rail truck.
89 Mustang Coupe 8.63 @ 142 mph on the motor.
8.62@160.51 mph with 200 shot of Nitrous.
American Pitbull Terriers .
Sleds are the best nothing like going 20 to 100 mph in a flick of the thumb.
Hey Andy I ho[e you and Renee had a good time last night.
Monique and I really liked having you over for dinner, and talking about everything.
Hope to be able to do it real soon again.
Scott and Monique
__________________
2006 Yamaha Apex RTX 1000 cc 4 stroke with reverse.
03 600 HO Rev Sport Hers
Black 04 Tritan Enclosed
1995 F250 Power stroker.Diablo chiped 300 + hp.
1993 Ford Bronco 4x4 - ex CN Rail truck.
89 Mustang Coupe 8.63 @ 142 mph on the motor.
8.62@160.51 mph with 200 shot of Nitrous.
American Pitbull Terriers .
Sleds are the best nothing like going 20 to 100 mph in a flick of the thumb.
__________________
2006 Yamaha Apex RTX 1000 cc 4 stroke with reverse.
03 600 HO Rev Sport Hers
Black 04 Tritan Enclosed
1995 F250 Power stroker.Diablo chiped 300 + hp.
1993 Ford Bronco 4x4 - ex CN Rail truck.
89 Mustang Coupe 8.63 @ 142 mph on the motor.
8.62@160.51 mph with 200 shot of Nitrous.
American Pitbull Terriers .
Sleds are the best nothing like going 20 to 100 mph in a flick of the thumb.
Tried to do the same on my 04 Ren X and no holes, but it seemed to me to be a tight fit between the steering post and some insulation on the back of the head light already in the back position, isn’t there contact when you move the steering post forward? And isn’t the post fixed with four bolts vertically at the bottom? (non adjustable)
Don’t you think it has no holes for adjustment for a reason? (what ever that might be)
Just curious and would really like to se some pics of it.
