on my helix i have 5 holes for sping placment,my kit instructions say to use the middle hole as this kit is for low engagement.my question is what happens if i try another hole,as in more lose or tighter spring setting???
Primary Sled: 2003 ski doo grand touring 700 sport
Where I sled: whenever and wherever there's snow..........
Posts: 210
normally each hole will either gain or lose 200 rpm's on top end, say if your sled has peak horsepower at 8200 rpm's and you can only pull 8000 tighten the spring 1 more hole, it may give you that little extra and pull at 8200 rpm's
