» Site Navigation |
|
»
»
»
|
|
» Buyers Guides |
|
|
|
» Network Links |
|
|
|
 |
|
05-04-2004, 11:29 PM
|
#1
|
|
Banned
Join Date: May 2004
Primary Sled: mm700 mod
Where I sled: utah
Posts: 42
|
i have a mm 700 with a 151 track and no slip drivers, but my hyfax on the left wears out fast like 2 rides and its done but the right is ok. my track hangs bout 5 inches from the slides on a stand will that cause it to do that? can any one help? its getting spendy,
|
|
|
|
Sponsored Links
|
Advertisement
|
|
|
05-05-2004, 12:57 AM
|
#2
|
|
Senior Member
Join Date: Feb 2004
Primary Sled: 98 1000 98 1000 00 1000
Where I sled: Northern Alberta
Posts: 222
|
Nothing broken on left side of suspension? Something let go on this side causing excessive pressure on left side or holding right side up?
|
|
|
|
|
05-05-2004, 01:21 AM
|
#3
|
|
Junior Member
Join Date: May 2004
Primary Sled: RMK 700 144
Where I sled: Mt. Baker Washington
Posts: 17
|
I had that problem on the RMK, it turns out the left side of the track was a touch tighter than the right, i fixed it and now she's fine. Your suspension or tunnel could be bent to where your left side is lower than the right. This ones a stretch, but if you ride the edge of the trail on the right, you'd be getting more powder in the track on that side so the right side is keeping cooler. Make sure your idler wheels are in good shape too.
|
|
|
|
|
05-06-2004, 07:53 PM
|
#4
|
|
Senior Member
Join Date: Jul 2003
Location: Martin, MI USA
Primary Sled: '99srx7asp,'01xc5,'01xc6gra, '01xc8sndrg,'00xc6ovl
Where I sled: michigan lp
Posts: 2,032
|
bad front shock? broken/missing bolt on the skid? mike
__________________
Ride Safe - Ride Sober
LMBSS.NET
|
|
|
|
|
05-06-2004, 09:28 PM
|
#5
|
|
Senior Member
Join Date: Feb 2003
Location: Northwest Ohio
Mileage: 1500++++
Primary Sled: 2003 firecat f7
Where I sled: Newberry, Grayling, Home, anywhere there is snow
Posts: 10,043
|
Quote:
Originally posted by yamberboy@May 4 2004, 11:37 PM
my track hangs bout 5 inches from the slides on a stand will that cause it to do that?
|
your track has a 5 inch gap between the track and the slide rails??? I have heard of loose but wow,,,, if this is the case, if you tighten that up some, you will get some of that speed your looking for,,,, you should have LOTS of ratcheting if its really that loose,,,,
__________________
03 F7
07 F6lxr
03 Z370es
78 Invader 440
|
|
|
|
|
05-06-2004, 09:49 PM
|
#6
|
|
Banned
Join Date: May 2004
Primary Sled: mm700 mod
Where I sled: utah
Posts: 42
|
i have the anti ratchet drivers and it don't ratchet so i dunno i took a comp. test on it its down to 120 lbs. hot . i poured some oil in it and it came up to 165lbs. so i think thats part of the problem, when i got it it was runing at 180 lbs. what fuel should i run with that high comp. i been runing 91 oct gas but i have ru av gas and it ran alot smoother would the lower octain wear it out faster?
|
|
|
|
|
05-09-2004, 11:20 AM
|
#7
|
|
Senior Member
Join Date: Jul 2003
Location: Martin, MI USA
Primary Sled: '99srx7asp,'01xc5,'01xc6gra, '01xc8sndrg,'00xc6ovl
Where I sled: michigan lp
Posts: 2,032
|
what does that have to do with hyfax wear??? did you check the suspension out??
__________________
Ride Safe - Ride Sober
LMBSS.NET
|
|
|
|
|
05-09-2004, 11:53 AM
|
#8
|
|
Senior Member
Join Date: Feb 2003
Location: Northwest Ohio
Mileage: 1500++++
Primary Sled: 2003 firecat f7
Where I sled: Newberry, Grayling, Home, anywhere there is snow
Posts: 10,043
|
Mike, in another post he was saying this sled would only do 90 to end and very sluggish low end,,,, thats why I brought it up,,,, with 5 inches of free hanging track, your gonna ratchet and you will loose some of your speed,,,,, he also stated that his sled was around 170 hp with the mods he has on it,,,,, so with that much power, he is evidently slipping his anti-ratchet drivers,,,,,
something definetly isnt right,,,,
__________________
03 F7
07 F6lxr
03 Z370es
78 Invader 440
|
|
|
|
|
05-09-2004, 11:54 AM
|
#9
|
|
Banned
Join Date: May 2004
Primary Sled: mm700 mod
Where I sled: utah
Posts: 42
|
nothing... and yes the suspention is ok i think is cuz its to loose, the track i mean cuz its not just one side its both i just didn't notice,
|
|
|
|
|
05-11-2004, 10:14 AM
|
#10
|
|
Senior Member
Join Date: Sep 2001
Location: Pontiac Lk Mi/Gaylord Mi
Mileage: 3200
Primary Sled: 07 ApexRTX, 06 IQ600 HO
Where I sled: Pontiac Lake (SE Lower)/Northern Lower Michigan
Posts: 2,560
|
For whatever it's worth, my XCR8 with 136" Edge conversion is running 4" sag, easily. No hint of driver slippage, using std. drivers. I'm wondering about a bent/damaged track clip. See any hifax shavings laying/hanging around?
__________________
'07 Apex RTX w/Pro X suspension conversion, Fox Floats w/resi's, Doo extro drivers, Cobra track, Dual Ryde FX rear clickers, .375 Edge torsion springs, HyGear Dual rate front skid springs, SLP anti-stab kit, Powermadd handguards/mirrors, 2" Rox riser, shimmed Poo skis w/custom (homemade) ski savers, Black chrome W/S, Graphics by Arctic FX, and a grin every time I think about it! New Project: 600HO Fusion bump sled, Air 2.0 w/hi/low valves, HRM spindles, Retro graphics, .359 torsion springs.
|
|
|
|
| Sponsored Links |
Advertisement
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
