95 Formula Z 583

[underdog]

:bash: Triing to set up carbs... first timer... i keep fowling plugs. does anyone know what the jet specs are, and the air screw settings are for this year and model? i seem to be fowling the plugs at idle. also the jet size on this sled is different on pto side and mag side, which is bigger? THANKS...

[FreezerBurnt]

95 FZ 583 specs you ordered

PLUG GAP 0.018inch

Carb 2x VM 40 69

Main jet 340 both sides PTO&MAG

Needle jet-224 AA-6

pilot jet 40

needle-clip position 7DL7-3

float 18.1mm /0.71 inch

Air screw 1 turn

idle 1800-2000

So as you can see your jetting is night right if both carbs are diferent

hope this helps

[underdog]

thanks freezerburnt , i will try to put this new found knoledge to good use. let u know how it goes...Thanks again.