Drive Shaft Removal - Snowmobile World : Your #1 Snowmobile Forum
http://www.snowmobileworld.com/forums
» Sponsors
Go Back   Snowmobile World : Your #1 Snowmobile Forum > SNOWMOBILING SECTION > POLARIS

Reply
 
Thread Tools
Old 01-08-2007, 09:09 PM   #1
pineburn
Junior Member
 
Join Date: Jan 2007
Mileage: 300kms
Primary Sled: polaris
Where I sled: saskatchewan canada
Posts: 6
Thumbs up

Hi I am trying to remove the driveshaft from my 1994 xlt.sks. I have removed the bearing on speedo side have also removed the chain and sprocket from the chain case . I slide the drive shaft all the way over to the speedo side but I cannot get the shaft out . The drive sprocket is up against the tunnel but the shaft is not completely out of the chain case,. Do I have to remove the chain case to get the drive shaft out? Or am I missing something? I have replace them on a newer xlt never had this problem. Also Any ideas on how to remove a ceased secondary clucth of the jackshaft. Thanks hope someone can help me out
pineburn is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 01-08-2007, 09:19 PM   #2
Dave600
Senior Member
 
Dave600's Avatar
 
Join Date: Sep 2006
Location: Sudbury
Primary Sled: 2002 MXZ Renegade 800
Where I sled: Sudbury ON.
Posts: 593
Default

Quote:
Hi I am trying to remove the driveshaft from my 1994 xlt.sks. I have removed the bearing on speedo side have also removed the chain and sprocket from the chain case . I slide the drive shaft all the way over to the speedo side but I cannot get the shaft out . The drive sprocket is up against the tunnel but the shaft is not completely out of the chain case,. Do I have to remove the chain case to get the drive shaft out? Or am I missing something? I have replace them on a newer xlt never had this problem. Also Any ideas on how to remove a ceased secondary clucth of the jackshaft. Thanks hope someone can help me out[/b]

If that XLT has the 4 driver set up, then im pretty sure the chain case needs to come off.
__________________
Sleds

2002 MXZ Renegade 800
2002 MXZ 800
1996 Formula Z 583
1999 Formula DLX 380
1997 Grand Touring 500
1990 Indy 500 x 2
1987 Indy Sport
Dave600 is offline   Reply With Quote
Old 01-08-2007, 09:23 PM   #3
xltier
Senior Member
 
Join Date: Dec 2003
Location: norway,me.
Mileage: 2260
Primary Sled: 06 fusion 700
Where I sled: rangely,jackman,moosehead,maine.
Posts: 543
Default

Quote:
Hi I am trying to remove the driveshaft from my 1994 xlt.sks. I have removed the bearing on speedo side have also removed the chain and sprocket from the chain case . I slide the drive shaft all the way over to the speedo side but I cannot get the shaft out . The drive sprocket is up against the tunnel but the shaft is not completely out of the chain case,. Do I have to remove the chain case to get the drive shaft out? Or am I missing something? I have replace them on a newer xlt never had this problem. Also Any ideas on how to remove a ceased secondary clucth of the jackshaft. Thanks hope someone can help me out[/b]
i had to remove the chaincase on my 96 xlt to do that.hth
xltier is offline   Reply With Quote
Old 01-08-2007, 09:38 PM   #4
flash 700
Senior Member
 
flash 700's Avatar
 
Join Date: Mar 2004
Location: north bay, ontario
Mileage: 250 miles
Primary Sled: 06 fst
Where I sled: north bay and ride all ontario
Posts: 183
Default

Well all the polaris's I've had I never had to remove the chaincase but the machines I've had only had 2 drive sprockets so I guess if you have more, than there probably right and have to take the chaincase off. If you DO have only 2 sprockets then it should come out without taking the chaincase out. It's not getting caught in the track lugs is it? As for the jackshaft this happened to me years ago. I put pressure on the back side of the clutch with my hand and threaded a bolt into the end to the jackshaft and used a hammer and started giving the end of the jackshaft some whacks on the bolt and with the vibration the clutch slowly but eventually worked itself off.
__________________
1980 centurion
1992 wildcat efi
1993 indy 500
1998 xlt special
2000 1/2 xc 600
2004 indy 500
2005 xc 700
2006 fst
flash 700 is offline   Reply With Quote
Old 01-09-2007, 08:53 AM   #5
steve6
Senior Member
 
steve6's Avatar
 
Join Date: Nov 2006
Location: Beaverton
Mileage: 50 miles
Primary Sled: polaris xlt
Where I sled: ontario
Posts: 269
Send a message via MSN to steve6
Default

The chain case has to come off on the 4 sprocket systems, its pretty easy though, only a few extra bolts.
steve6 is offline   Reply With Quote
Old 01-10-2007, 01:24 PM   #6
pineburn
Junior Member
 
Join Date: Jan 2007
Mileage: 300kms
Primary Sled: polaris
Where I sled: saskatchewan canada
Posts: 6
Post

Quote:
The chain case has to come off on the 4 sprocket systems, its pretty easy though, only a few extra bolts.[/b]
Yeah you guys were right the chaincase had to come off . Thanks for the information. :
pineburn is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.2

All times are GMT -5. The time now is 04:43 PM.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.