hi guys....i have a 2005 500 classic.it has the m-10 rear suspension and im putting in a 144 skid and track ...what should i run for gears and clutching??....i bored out the cylinders to .30 over and am currently looking for a set of pipes...so the power has been upped slightly...im below 3000ft and have no plans to run in the mountains....its just for the sometimes 3 feet of snow we get around here and the odd ditch banging i will do.Thanks
If its a ves motor do not put twin pipes on unless you want to rejet all the time otherwise they are very likely to blow up. Keep stock weights go blue with white stripe primary spring. It's a stock pro x 600 spring. I run it in our 500 classic and it runs good.