I knwo this was probably mentioned before and I did search for it but couldn't find anything so sorry for the repetitiveness of the question.A buddy has a stock formula ss and wants some clutch work done to it.nothign major but just slight mods and was wondering what he needs to "ramps,weights and springs" I am very familiar wiht any other clutch besides a bombardier and he needs his completely rebuilt anyway sot hat si why he will buy new parts for it.
So what is some good starting points of parts to buy for primary and secondary cluthes and what settings are recommended for a stiffer engagment and a little more aggressive shifting?Thnks in advance
Set ups for mxz 670s will work for that sled. Take your pick, there is quite a few available. They work good with 287 ra,mps more pin weight around 18grs and a 230/350 spring, wind secondary to around 20lbs.
