Snowmobile World banner

1 - 8 of 8 Posts

·
Registered
Joined
·
657 Posts
Discussion Starter #1
I'm thinking about trying the setup that was in snotech.Gearing,helix,weightsand secondary spring.Has anybody tried it?Any opinions of the setup?Thanks in advance.
 

·
Registered
Joined
·
657 Posts
Discussion Starter #6
Snow tec setup is: 62/54 helix
                         25/38 gearing
                         72 gram weights
                         red/white spring in the second hole
What do you think.
                       
 

·
Registered
Joined
·
1,301 Posts
Depending on what kind of ridding you want to do here are a couple set up that i have tried.    leave clutch stock and gear23/40 and it works good tested with srx 700 and were neck and neck all the way thru.   Or try stock gearing and a D&D silver secondary in hole3 works good. try 57/50 helix with cat yellow secondary hole 3 . If you want to buy a clutch kit get the Black Magic trail and it works good (alittle better than D&D) or gear 21/39 and hold on cause you going to get yanked real hard to 90mph (good for 660 feet drags). If you want to tryD&D trail kit you might want to gear down to 23/40 and it will be okay in short races and ditch banging. I have been testing all year and know that these combos work. The cheapest way is D&D silver and stock every thing else. Let me know how you made out and keep a record for yourself.
 
1 - 8 of 8 Posts
Top