Snowmobile World banner

1999 340 Engine Head Gasket

1211 Views 1 Reply 2 Participants Last post by  63November
I have just changed the head gaskets on my 1999 Indy 340. The old gasket was leaking oil, when removing, the head bolts did not seem very tight. I searched the archives for this info, with no luck.

Can anyone tell me what to torque the head bolts (12mm) down to?
1 - 2 of 2 Posts
Polaris specs call for 18-19 ft/lbs on the four head studs on the Indy Lite.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top