Snowmobile World banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Took the tank off for repair. put seat back on, put gas in the tank. pulled it over and over and over!! nothing! Do you have to bleed the system, when the sled is EFI? any other help would be great.
 

·
Registered
Joined
·
33 Posts
I've read that you have to pull it over about 100 times to repressurize the system. I also read that a quick way to do it was just pour a little gas directly into the cylinders and fire it up.

That's all I've got.
 

·
Registered
Joined
·
533 Posts
Unhook the fuel pump and hook up a 6volt battery to charge the fuel lines.

if that don't work send me a message. I know a lot about that sled. Rebuilt one from ground up and have worked on several of them.

newf
 
1 - 3 of 3 Posts
Top