Snowmobile World banner

1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
I would like to install a primer on a 2004 Polaris Touring snowmachine but am not sure how to connect it to the carborator or if there is a part that I can buy to put between the carborator and the engine. Can anyone make a recommendation on how to got about this project. It is needed as the machine is hard to start in the Alaskan cold weather.
 

·
Registered
Joined
·
577 Posts
My son's race sled was always hard to start when is had set for awhile
. We just opened the hood and poured some fuel in the air breather. I assume this occurs when it has set over night. If it is a problem when you are out and stopped for an hour or so I would carry a squeeze bottle of fuel on the sled or a can of starting ether.




If you still want a primer just run the hose into the breather instead of the carb.
 
1 - 2 of 2 Posts
Top