Snowmobile World banner

1 - 2 of 2 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
what hole are you using on the driven clutch ( for the spring ) OOOOO im in the middle now is that right thanks !!!!!!!!!!!! ^
 

·
Registered
Joined
·
6 Posts
what hole are you using on the driven clutch ( for the spring ) OOOOO im in the middle now is that right thanks !!!!!!!!!!!! ^[/b]
Don't you mean the drive clutch? I only changed my drive clutch (Primary) spring. My driven clutch spring was the same as the ZR. The driven (Secondary) clutch on my sled pulled completely out of the sled after you screw off the bolts, then put in the helix.

There was a hole through the plastic body directly next to the drive clutch on my sled. I just pulled off the plastic cap (about 4" x 4" or so) and I could push on the cover of the clutch.
 
1 - 2 of 2 Posts
Top