Snowmobile World banner

1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hi Guys,
Posted this in the polaris section with no luck so far so I am posting it here with the hopes that someone will be able to help.
I have a 97 XC 600, it has been bounced off a tree a few years back and cracked the floorboard and damaged the front control arm mount. since then the mont has sarted to crack away from the tunnel. I need to swap out this tunnel as I dont think it is safe to ride. I have access to a selection of poaris Indy tunnels, problem is I have no idea which one will work for my sled. Any and all help would be extremely appreciated

Thanks in advance
Joe
 

·
Registered
Joined
·
556 Posts
If you go with an older indy the rear front suspension holes won't line up.
A newer tunnel has a different trailing arm point.
you should be able to do a quick look for everything else
 
1 - 2 of 2 Posts
Top