Snowmobile World banner

C7 To Sc10 Conversion-quick Question

1547 Views 1 Reply 2 Participants Last post by  FreezerBurnt
I was just looking at some skids on ebay, and noticed the SC10 looks to only have 2 bolts per side holding it in, where my C7 has 3. Is that correct, or am I not seeing a 3rd mount on the pictures?

Its my understanding to do the swap I need to relocate the rear mount 24 3/4" back from the front, correct? What about the height of the bolt?

Thanks for the help guys! Dan
1 - 2 of 2 Posts
grind off the 4 back mounts

as you do not need the middle ones

all you need is a 97 Mach Z/1 rear tunnel brackets

use grinder as it is 100000000 time faster when taking off old brackets

Attachments

See less See more
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top