Snowmobile World banner

1 - 4 of 4 Posts
Joined
·
16 Posts
Discussion Starter #1
On my PowderSpecail 600EFI, i was just wondering how do u go about choosing the correct carbides? Whats the differecne between the 90 degree carbides compared to the 60 degree carbides. How many inches long should the carbides be? What pattern, like a few inches in front few in back , and alot in the middle? My sled does have the long track, and is studed with i belive 144 studs.THANX
 

·
Registered
Joined
·
310 Posts
Seeing how you have 144 studs get an 8 or 10 inch carbide. 60 degree is for more aggresive riding, as the angle is better for traction. Rotein is a great brand, also Woody's and Bottom line are good as well.
 

·
Registered
Joined
·
664 Posts
:withstupid: I would get 8-10 inch and the 60 degree, in fact that is what I have on my mxz700 with 144 studs(10 inches of carbide). Another thing I would recommend is a 1/2 inch bar.
 
1 - 4 of 4 Posts
Top