Snowmobile World banner

1 - 2 of 2 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter #1
l just rebuilt my motor so how could i see if my oil pump is working? the reason i'm asking is because my water pump belt broke and i burned it up and i don't want to do it again
 

·
Registered
Joined
·
58 Posts
Mix the fuel in the tank 50 to 1  then remove one of the outlet hoses from the pump to make sure its pumping oil. If it burned down because of the water pump I would not worry about the oil pump. Also if you change the oil filter you can bleed the pump by removing the  screw on the top of the pump. any air bubbles will bleed out as the oil runs out, 10 or 15 seconds is plenty,
                                    Tom
 
1 - 2 of 2 Posts
Top