Snowmobile World banner

1 - 4 of 4 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
Any good set-ups or ideas for 1000' radar runs, clutching and gearing?
Sled is a 96'ZRT 600 w/ D&D pipes and shim kit, & cylinder work. Altitude is 0-2000.
THANKS
 

·
Registered
Joined
·
158 Posts
First, this is considered a improved stock. Next determine the pipe
RPM. The stock gears may work if the pipes are tuned for 9200. Try an Erlanson silver primary spring and 48-52 gram weights to get your pipe RPM. try a 58/52 58/50 helix with the yellow spring. Then test and keep record of all your changes and what they do.
 

·
Registered
Joined
·
485 Posts
Here a tip contact Dale O`toole at Dylton Ind. they ice race a 600zrt
and won the eastern can. points with it.By the way my pipe`s turned 9250
on my `95 600 zrt, they were D.D.Dale`s #902-897-3333 in Nova Scotia
or post www.daltonindustries.com Hope it helps you out ,there times I miss
the sound O` that sound of the triple at full song.

Cape Breton Stock..........................
 
1 - 4 of 4 Posts
Top