Snowmobile World banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I have a 93 indy 5 that i want to make all my own. I am wondering if i could clone in an edge rear with a little work? Any help would be GREATLY appreciated! :hallo1:
 

·
Registered
Joined
·
213 Posts
sure you can put a edge in the rear,but i seriously doubt the
the front ends 7-8 travel will make it handle very well.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
I had thought of that, I was thinking of perhaps the trailing arms and such from xtra 10 or 12 suspension. That sound a little more realistic?
 

·
Registered
Joined
·
791 Posts
The xtra-12 will not fit on that sled as the trailing arms are about 4 inchs to long. The xtra-10 will bolt on as long is doesn't have CRC.
 

·
Registered
Joined
·
216 Posts
try this website on for size. It has just about everything you would ever want to do with a standard indy chassis.
www.off-road.com/snowmobile/project/indy/xtra10.html
If you have a evolved chassis you can put an extra-10 in it as well. for example 94 and 96 evolved chassis use the same front end but the rear suspensions were xc-100 on the 94 and xtra-10 on the 96. just follow the guidelines in the website.
 
1 - 6 of 6 Posts
Top