Snowmobile World banner

1 - 7 of 7 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I'm installing an extra 10 suspention in my '89 Indy Trail sks. Can anyone give me the location
measurements for the mounting holes? I hate to just take a shot in the dark.
Thanks
 

·
Registered
Joined
·
2,560 Posts
Extra-10 121" or 136"?
 

·
Registered
Joined
·
2,560 Posts
Crap. I was afraid you were going to say that. See if this will get you started. It's a drawing for the 121" skid that Jerry Butler from jbshocks.com keeps on his website:

http://jbshocks.com/x10mount.jpg

The 136" Extra rear arm mounts about 3" further back than the 121" rear arm. To my knowledge, nobody has a good set of dimensions drawings to illustrate any better than this.
 

·
Registered
Joined
·
1,558 Posts
i got my RMK with the 136 extra 10 at home ill measure and get this up tomorrow for you ok
 

·
Registered
Joined
·
4 Posts
Discussion Starter #7
I took some measurements yesterday and by the looks of the drawing by, http://jbshocks.com/x10mount.jpg, I wll need to move the front mounting hole forward 1 3/16" along with the reinforcing plate. It appears this will keep the geometry close to the same as the old track too. As for the rear plate, it will need to be moved also.
In the meantime I'll hang loose for another day and see what measurements "timespentsearching" comes up with off his machine.

Thanks alot guys and I'll keep you in touch with progress.
 
1 - 7 of 7 Posts
Top