Snowmobile World banner

F7.. How Do I Get Back Skid Frame Back In!

3K views 6 replies 6 participants last post by  timespentsearching 
#1 ·
I had my suspension rebuilt and i was reinstalling my skid frame, I got the front bolted in, but the rear bolts and holes are misalgined by about 1/2 inch. Anyone got any tips for getting that thing back in there? Thanks for the help
 
#4 ·
I have a buddy sit on the sled and I use a bat to compress the suspension,,,, I would bet that I ratchet strap as Mark suggested would work better than my old softball bat,,, but someone helping sit on it to compress it has always helped.
 
#6 ·
if doing alone. i unbolt rear springs and align bolt holes up. use a large srew driver or bar to hold spring as you take bolts out. becareful there is some good tension on spring. after installing rear bolts. reverse step to install springs.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top