Snowmobile World banner


804 Views 1 Reply 2 Participants Last post by  Thumbdoctor
I bought a full set of gaskets for my 96 Mach 1 and it came with 3 different base gaskets. Does anyone know what the correct thickness is?
1 - 2 of 2 Posts
You need to compare with your old base gasket. Either measure using a micrometer or if its a Rotax gasket.. count the holes in between the jugs Eg. 6 holes means .6 mm. You should be shooting for .065" ~ .070" squish using 3/16 rosin core solder.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.