Snowmobile World banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,782 Posts
You need to compare with your old base gasket. Either measure using a micrometer or if its a Rotax gasket.. count the holes in between the jugs Eg. 6 holes means .6 mm. You should be shooting for .065" ~ .070" squish using 3/16 rosin core solder.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top