Snowmobile World banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,301 Posts
Discussion Starter #1
I finished long tracking my ZR900 and need to know if I should get a guard for the hose that crosses between the exchangers. The hose is in the stock location and is about 6-8 inches in from the snow flap (now with the tunnel extention on). I cant see me bottoming out far enough to hit the hose.....Maybe?? What should I do?? Do you think it is safe to run the sled without a guard??   Thank you in advance
 

·
Registered
Joined
·
172 Posts
Take your sled for a ride and find a good size bump.    try get the suspension to bottom or come close to it.     and then inspect the tunnel and hose to see if the track touched(it shouldn't).      Or just use a peice of 16 gauge aluminum and make a gaurd for some extra protection.  make it wedge shaped, starting flat with the tunnel at the back and then all flush with the hose at the heat exchanger.
 
1 - 2 of 2 Posts
Top