Snowmobile World banner

Help please!:-0

1449 Views 8 Replies 5 Participants Last post by  99Indy500
hey all! First off i own a 92 polaris 440 indy and the suspension was ruined on it so the neighbor had a xtra 10 suspension laying around i can have! Its off a 97 500 xlt! Has anybody done a swap like this? Can they give me soem tips on how to do it? Any help would be so awsome!
thanks ahead of time
mike
if u could reply to [email protected]
1 - 9 of 9 Posts
Umm
 I never heard of a 1997 XLT 500.  
See less See more
ddaytona,
 sounds like you are going to change that sled into a winner.
im hoping so but i just have to figure out how make the swop! if anything it will save my azz allot! lol
anybody got any clues? Do you think im gonna ahve to move the plates for the suspension bolts?
well If anybody wants the suspension that came out of it  there mor ethen welcome to it! its just has a broken spring and the shock could use a recharge!
it sounds to me like your going to make that old sled into a high-tech sled. Good for you. But it will be hard to change that all around.
IT is simple to do if you measure from your front bolts (by your toes ) back to the rear bolts on your brackets then take that measurement and compare it to the other suspension if it is the same then do it if you need more help let me know e-mail me at [email protected]
G
It can be done I had an 86 polaris 440 and I ended up getting into an accident so I decided to upgrade I put a 96 polaris xlt hood and A suspension and the seat it looked just like the xlt and it worked out really good for me....have fun!!!
See less See more
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top