Snowmobile World banner

1 - 2 of 2 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
I have got a 2001 MXZ 600. I just took the secondary out tonight to chage the spring pressure. I got it
home and put on the sled but I think I wound it the wrong way. If I'm sitting on the sled what way
should the sliding part of the clutch go. Toward the front or back of the sled.
 

·
Registered
Joined
·
175 Posts
Give it a 1/4 turn counter-clockwise before putting snap ring back on.That would be to the front of the sled with the clutch sitting on the shaft.I use the spring compressor tool to do it as i find it to hard on the hands.
 
1 - 2 of 2 Posts
Top