[thesparkleman]

What adjustments can I make to get the idle down to normal?  It runs a 3700-4000 RMP at current idle!

 

[SteveCZ]

There is an adjustment screw on the left side of the carb towards the middle.  The bigger screw, but.... and this is where I get confused.... so if I'm wrong, feel free to help me out guys....

Clockwise = higher idle

counterclockwise = lower idle

But make sure that you do them equally, and only at a 1/4 turn at a time and test.

Steve

 

[thesparkleman]

Will that be the throttle stop screw?  Thanks alot for your help.

 

[SteveCZ]

No, not on the top of the carb where the slide is... on the left
side of the carb, in the middle (halfway between the motor and the airbox)..... it is spring loaded..... go to

http://www.brownsleisureworld.com/Parts....M38.htm

this has the whole schematic for you

Its going to be part number 15......

 

[thesparkleman]

Thanks alot I will try that.