Snowmobile World banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Worked fine last season and after starting up sled this season the lever on the handlebars is unmovable yet not engaging the hydraulic brake on the discs. Almost acts like it was filled with water instead of hydraulic fluid and is frozen therefore cannot be polled or depressed at all yet I’ll take it off and put it in a warm room and it still is the same….
Wood Bicycle part Bumper Automotive exterior Metal

In the picture showing the lever pivots on an axis to push that blue hydraulic solenoid button supplying pressure in the line blah blah blah….Anyhow that blue button it’s supposed to depress when you pull the lever does not budge at all in or out… Any ideas?
 

·
Registered
Joined
·
105 Posts
oring failed let water in corroded bore locked plunger if its pitted bad you may need to replace it soak it with penetrating fluid
 
1 - 2 of 2 Posts
Top