I've got a new 2004 Legend with the 600 HO SDI motor in it with less than 100km.
(Hard to believe but I got the sled as NOS at the end of last winter)
Just had the local dealer (Gateway) do the PDI (ie. setup the electronics) so all should be good there.
Cold idle is too low and it will stall unless I play with the idle.
Warm idle is too high. After I slow to a stop, it will idle @ 3,000 or so and not come down no matter how long I wait. If I turn it off and do an immediate start, it idles properly.
Any thoughts from the SDI gurus?
(Hard to believe but I got the sled as NOS at the end of last winter)
Just had the local dealer (Gateway) do the PDI (ie. setup the electronics) so all should be good there.
Cold idle is too low and it will stall unless I play with the idle.
Warm idle is too high. After I slow to a stop, it will idle @ 3,000 or so and not come down no matter how long I wait. If I turn it off and do an immediate start, it idles properly.
Any thoughts from the SDI gurus?