Snowmobile World banner

No Reverse/handwarmers

884 Views 4 Replies 3 Participants Last post by  proline1
Have 2007 MXZ X 550F and all of a sudden reverse, handwarmers, and face sheild heater plug don't work. Fuse is good and headlights work. Any thoughts? Thanks!
1 - 5 of 5 Posts
I do not have your wiring diagram, but the lights and warmers go through a plug on the left side. Check to make sure the plug has not come apart inside of the left control area/cover. Do the high beam lights work? Does the thumb warmer work? The visor plug is feed directly from the regulator, I would check on the wiring at the visor plug.

Good luck. John.
Was the visor plug added after the sled was bought? If so I'd be tracing that connection.
Was the visor plug added after the sled was bought? If so I'd be tracing that connection.[/b]
Visor plug was added after purchase and connection seems tight. Lights work but still no reverse, or warmers.
Thanks for the help and tips! Turns out it was a wire connection going across the handle bar and under the crash pad. Thanks again!!!
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top