Snowmobile World banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2,646 Posts
Here is an email I recieved today. Good luck.
Caleb :

[email protected]

We no longer have the Crank Shop 1006.
We do have two (2) sets of race pipes for a 1000
triple.
A set of Crank Shop pipes that fit the s-2000 chassis,
as well as the dsa chassis.
Also, we have a set of Jaws pipes to fit the CK3
chassis.
Let me know if you know anyone interested.

Thanks.
Scott
 

·
journeyman sled/motorhead
Joined
·
4,440 Posts
zmachman runs crankshops pipes,I have found these to work best on the rotax engines.
 

·
Registered
Joined
·
4,316 Posts
Personally, and depending on what you want the sled to do (ie trail or race) I don't like how high the Jaws pipes have to spin your engine (something like 9000+rpm) The crankshop pipes keep your max rpm relatively close to stock (Perhaps maintaining some a little more reliability than spinning them very fast). I do know though, that Jaws claims that their pipes will put a stock mach at around 170 hp.


       I believe Limskii runs Jaws pipes on his Mach, and I know ZMachMan runs exclusively Crankshop.



Last edited by Rocketman at June 15, 2002, 08:14am
 
1 - 5 of 5 Posts
Top