Snowmobile World banner

1 - 6 of 6 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter #1
I have a set of crankshop trail pipes and the mag stinger is exteramly louder than the rest :( :( Is it possable ot repack the tubes like on a dirt bike or quaid ???
 

·
Registered
Joined
·
756 Posts
Yes, grind off the welds slide the silencer apart repack as normal spot weld back together.
 

·
Coming 2 a Trail near You
Joined
·
2,267 Posts
Buy new pipes i think that sounds easier hehehe..
 

·
Registered
Joined
·
101 Posts
if you can back up the noise with good perf. then louder is better if not might as well put the stock pipe on just a thought :)
 

·
Registered
Joined
·
756 Posts
Louder is not better. Very often there will be a torque loss with a blown out silencer. The welds I speak of are on the side of the silencer can, & just a little spot bead. They are small & easy to grind off. This is a simple job.
 
A

·
Guest
Joined
·
0 Posts
Originally posted by MXZ900@Oct 9 2002, 09:18 AM
Louder is not better. Very often there will be a torque loss with a blown out silencer. The welds I speak of are on the side of the silencer can, & just a little spot bead. They are small & easy to grind off. This is a simple job.
I have done it before but not in a long time. What I remember it's easy as #$##.
 
1 - 6 of 6 Posts
Top