Snowmobile World banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Does anyone know what would be entailed in rebuilding a 02 zr 500 into a zr 600 if it's possible? I was told the lower ends are the same. Obviously I will need 600 pistons and cylinders, and need to re-jet my carbs. Has anyone ever heard if this is possible or if anything else needs to be done? I have to replace 2 pistons and thought if the jets and cylinders were the only other extra costs, I figured I would try this. Any input? Thanks.
 

·
Registered
Joined
·
4,869 Posts
It could be done :D


But don't forget

heads
valves
pipe
muffler
ypipe
clutching
gearing
 

·
Registered
Joined
·
185 Posts
One thing to look out for is many of the 600 had powervalves and your 500 dont so make sure you get the right juggs but it will work have built two 600's this way
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
One thing to look out for is many of the 600 had powervalves and your 500 dont so make sure you get the right juggs but it will work have built two 600's this way[/b]
My 500 is a 2002 and it has power valves, so I just need 600 jugs and pistons with power valves correct?
 

·
Registered
Joined
·
4,869 Posts
no you need what I listed

as everything listed is for the 600 only
 
1 - 5 of 5 Posts
Top