Snowmobile World banner

RMK 600 2008, doesn't start

553 Views 1 Reply 2 Participants Last post by  SkiiDooo12
Hi everyone,
So I have a problem starting my Polaris RMK HO 600 155, from 2008, fuel injected. I had to rebuild engine, everything is ok with it. The problem is that it doesn't start, doesn't get fuel to cylinders. Have checked everything and found that what when I pull, injectors don't get enough voltage to open, shows about 2V, if I disconnect them and checking only the plug then I get more than 12V.
Fuel pump is working, checked.
Resistances on stator connections is good.
Where should I look for the problem?
1 - 2 of 2 Posts
1 - 2 of 2 Posts