Snowmobile World banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I HAVE 2000 MXZ 700 AND IM GOING THROUGH ALOT OF BELTS HAD MECHANIN LOOK AT IT SAID IT WAS ALIGNED BUT FOUND IT DID NOT HAVE PLAY ON THE SECONDARY  SO HE SAID HE FREED IT UP  BUT WITH ANOTHER 600 MILES ON IT  IWENT THROUGH 1 BELT AND LOST A LOT OF LOW END ON ANOTHER  PLUS THE SECONDARY IS NOT FREE WHAT COULD IT BE PLEASE HELP
 

·
Registered
Joined
·
400 Posts
Where I'd start:

- check the torque stopper. Make sure nothing is cracked
 around it and no play.
- open the chaincase and make sure all is well there.
- buy an alignment bar and do it myself

- take the secondary apart and clean it

Good luck. Post your results.
 

·
Registered
Joined
·
233 Posts
THE SKI-DOO ALIGNMENT BAR PART # FOR A 2000 MXZ 700 IS 529-026-700. I SHIM MY SECONDARY TIGHT AND DON'T ALLOW IT TO FREE FLOAT. THE SHIMS ARE AVAILABLE AT YOUR SKI-DOO DEALER. I HOPE THIS HELPS.
 
1 - 3 of 3 Posts
Top