Snowmobile World banner

1 - 2 of 2 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
I bought an ultra 2 years ago and now the studs are shot.  I have never dealt with studs before and I dont know my options.  If i take out my old studs do I need to put new ones in the old holes or can I leave them open.  My track is still in good condition and I would like to try it with out studs. The sled is piped and I goes like #### Will there be a huge difference in any thing?  anyone give me some opinions or ideas anything helps
 

·
Registered
Joined
·
532 Posts
Hello,

 You do not have to re-stud if you don't want to.  After you remove the studs ( use a little heat to warm up the nyloc ) burn the holes with a small torch or lighter.  You just have to burn the threads in the track so they dont frey.  You should be able to run the sled a long time with holes in the track.  I don't know how many studs you have, but as long as it's not 192 + you should be ok.

Good Luck
 
1 - 2 of 2 Posts
Top