Snowmobile World banner

1 - 5 of 5 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
I have 192 studs that I can install on a 1997 MXZ 670. How many should I put in? I like to ride on the lake quite a bit, and also agressive trail riding! Shoudl I put them all in, or just go with 168? 144? Also, should I stick to the up the center pattern, or do the outside to?

Jason
 

·
Registered
Joined
·
50 Posts
I've got a 99 MXZ 679 HO.

I installed 144 out to the edges.

If I was to doo it again I would run the 144 in the center only.

I'd like to break the tail loose a little easier.

IMHO 192 is unnecessary weight, 168 could work, but unless you got a modded engine and 8" of carbide, that may be more than you need also. :thumbsup:
 

·
Registered
Joined
·
624 Posts
Taking what I have listend to as good advice. Start with 144. If you like to skid in the turns, keep them inside. :blahblah:
 

·
Registered
Joined
·
1,139 Posts
I have a 144 in my 97.I also put them in the outer edges though making sure to stay away from the edge of the windows.
 
1 - 5 of 5 Posts
Top