Hi! I am new from the Duluth, MN area and have a couple of questions. First when I started my sled for the 1st time this year my temp light came on right away, let it run a few minutes, and it's still on. Coolant is full so do you think the senser is bad or should I run it a bit when we get snow? The second question I have is when I went thru the bearings and put a new track on I have more shaft play with my secondary then I did before. Do you think the shaft needs to go further into the chaincase or just shim it. It originally had about a 1/16 inch of play.Now it has around an 1/8 inch of play. I guess I should have marked the shaft but I figured the gears would snug eveything up and then tighten the set screws on the secondary side.