My dad, who is now retired has way to much time on his hands. This is a picture of his latest creation. Two sets of my brothers blown 503 pistons from his 97 SL. If you look at the stand he has a map of where it blew up. Believe it or not, it was within 100 feet both times.
Ah yes, gearhead lamps. That is one good looking unit. hehe. I made a lamp a couple years ago that had a Ford 302 camshaft for the stick, and I cut out a monster truck sillouette (sp?) for the base. Wish I had a picture here to post. I always thought it would be cool to make some barstools out of V8 crankshafts. They'd be a little heavy, though.
Hey tell your dad..nice job on the lamp, I'm trying to think of what I could make with all these old wear bar's I have laying around hear.......??? dooZ
I have an early 1970s Bombardier Ski-Doo single cylinder. I need to lower the primary clutch engagement rpm. What spring and weights would make it possible to lower the engagement of the primary clutch. Thanks for any knowledge you can send my way... Chevysteve.
I wasn't interested in a new sled. Was satisfied with my 16 4-Tech 1200 Renegade and my 17 900 ACE Renegade. Dealer talked me into trying his personnal 19 900T Renegade with a chip and reflash. Claims it puts out 190 hp.
Besides being quick,and fast it doesn't lag and handled well. So I...
Hello
My snowmobile is skidoo Formula MX XTC, model year 1995. My skidoo front light work poorly (only 3 volts given) and i was wondering where is the battery located? Or does this skidoo have battery at all? Engine is rotax 467. Anyway there is something wrong with electrics.
I ride a 2001 ski doo touring 500fan, and over the past year have spent a lot of time fixing issues with it (it was sitting unprotected in a backyard for 5 years). I cleaned the carbs, fixed some electrical contact issues, and redid much of the fuel system. It used to bog down when I went past...
First time for the season the brakes lockup and got hot. and continued to do it all day. So replaced the caliper and dot 4 brake fluid cleaned reservoir and tried brakes seemed to work fine. Go out again brake lockup.
Can my rotor be warped causing this brake up?
Thanks in advance
A forum community dedicated to snowmobile owners and enthusiasts. Come join the discussion about performance, troubleshooting, trails, maintenance, riding tips, modifications, classifieds, accessories, and more!
