Snowmobile World banner
1 - 3 of 3 Posts

·
Registered
Joined
·
393 Posts
Discussion Starter · #1 ·
a 14" long 3/4" threaded rod, i welded the nut so i can put it in the vise, i used a piece of nylon i had and drilled a 3/4"hole in it. use the top nut to compress the spring.....worked slick for me
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top